Removing The Hook Cover Plate; Inserting The Bobbin - Sears Kenmore 385.16231 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

= Removing
the hook cover plate
.
(_ Hook cover plate release button
(_ Hook cover plate
Slide the hook cover plate release buttonQto
the right,
and remove the cover plate (_.
Inserting
the bobbin
_) End of thread
(_ Notch
(_ Notch
@ Threading diagram
[] Place a bobbin in the bobbin holder with the thread
running off counterclockwise,,
[] Guide the thread into notch (_on the front side of
the bobbin holder, Draw the thread to the left, sliding it
between the tension spring blades
[] Continue to draw the thread lightly until the thread slips
into notch (3"_o Pull out about 6" (15,,0 cm) of thread
[] Attach the hook cover plate rCheck the threading by
referring to the diagram@shown
on the hook cover plate.
[]
[]
@
[]
.J
.......
J
26

Publicidad

Tabla de contenido
loading

Tabla de contenido