Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING TV, CABLE TV, VCR
AND CD PLAYER
To
confirm the stored ID code
You can check
the stored
ID code
by counting
the indicator
blinking.
You can control
basic functions
of a TV, CABLE
TV, VCR and
CD player with this remote
control.
TO
ENTER
THE
ID
CODE
OF
THE
EXTERNAL EQUIPMENT
Indicator
MODE SELECT
DIGIT
buttons
(o-9)
SET UP
Before attempting
to control them, be sure to enter the ID code
of the external
equipment
to the remote control
as follows.
1
2
3
4
Confirm
the
code
number
of the
external
equipment.
See
the
ID code list in the "APPENDIX' at the end of this
manual,
Press either the TV, CABLE, VCR or CD button in
the MODE SELECT area.
Press and hold the SET UP button for about 2.5
seconds.
Confirm that the indicator
blinks twice while pressing
the SET
UP button.
Press three DIGIT buttons which correspond
to
the ID code of the external equipment.
For example,
if your CD player is an AIWA unit, the required
ID code is 124 or 157. In this case, press the DIGIT buttons
in the order of"1 ," "2 and "4" (or "1 ," "5" and "7" ).
After the third DIGIT button
is pressed,
the indicator
blinks
twice indicating
that the ID code is correct
and is stored
on
the remote control.
1
2
3
4
5
6
Press either thelW, CABLE, VCR or CD button.
For example,
to check the stored
code for CD player, press
CD.
Press and hold the SET UP button for about 2.5 seconds.
Press "9/' "9" and "O."
Press "1;' and count the indicator blinks.
For example,
in the case that the stored ID is "1 57."
The indicator
blinks once.
Press "2;' and count the indicator blinks.
The indicator
blinks five times,
Press "3;' and count the indicator blinks.
The indicator
blinks seven times,
TO CONTROL TV, CABLE TV, VCR AND CD
PLAYER
VOLUME
DIGIT
buttons
(O-9) and ENTER
MODE SELECT -
VCRICD
lfl:Pause, U: Stop,
POWER -
M:
Rewind,
-: Play,
W
:Fast forward
1
2
Press any button in the MODE SELECT area (TV,
CABLE, VCR or CD).
The remote
control
is ready to operate
the selected
mode
equipment.
Press one of the buttons indicated above.
For the use of the O – 9 and the ENTER
buttons,
see the
instruction
manual
supplied
with the unit to be controlled.
Other buttons indicated above have the same function which
you will find on the unit to be controlled.
Reenter the ID CODE of the external
equipment
after replacing
the batteries
of the remote control.
[f there
are plural
ID codes
for external
equipment
in the
"APPENDIX,"
try each number
listed until you can control
the
external
equipment.
ENGLISH
18
Publicidad
Capítulos
