Care And Maintenance; Specifications - Aiwa AV-DV70 Manual De Instrucciones

CARE AND MAINTENANCE SPECIFICATIONS
Occasional care and maintenance of the unit is needed to
optimize the performance of your unit.
To clean the cabinet
Use a soft dry cloth.
If the surfaces are extremely dirty, use a soft cloth lightly
moistened with mild detergent solution. Do not use strong
solvents, such as alcohol, benzine or thinner as these could
damage the finish of the unit.
FM tuner section
Tuning range 87.5 MHz
to 108 MHz
Usable sensitivity 13,2
dBf
(IHF)
Antenna terminale 75
ohms (unbalanced)
AM tuner section
Tuning range
530
kHz to 1710 kHz (1 O kHz step),
531 kHz to 1602 kHz (9 kHz step)
Usable sensitivity 350
pVlm
Antenna
Loop antenna
Amplifier secltion
Power output [Stereo
Mode]
Front
130 watts per channel, Min. RMS
id
8
ohms, from 40 Hz to 20 kHz, with no
more than 0.97. Total Harmonic
Distortion
[Dolby Digital Surround
olr
Dolby
Pro Logic Mode]
Front
120 watts
per channel, Min. RMS at 8
ohms, from 40 Hz to 20 kHz, with no
more than 0.9°A Total Harmonic
Distortion
Rear (Surround)
60 watts per channel, Min. RMS at 8
ohms, 1 kHz, with no more than 0.9'%.
Total Harmonic Distortion
Center
120 watts, Min. RMS at 8 olhms,
1
kHz, with no more than 0.97. Total
Harmonic Distortion
Total harmonic 0.08 % (85
W, 1 kHz, 8 ohms, Front)
distortion
Inputs AUDIO IN
PHONO: 2.5 mV, adjustable (47
kohms)
CD: 250 mV, adjustable (47
kohms)
TAPE MONITOR: 350 mV,
adjustable (47 kohms)
VIDEO l/DVD/MD, VIDEO 2/LD/
TV, VIDEO 3, AUX: 250 mV,
adjustable (47 kohms)
DIGITAL IN
COAXIAL (VIDEO 2):
OPTICAL (VIDEO 1):
accept linear PCM (32 I(Hz, 44.1
kHz and 48 kHz) signals and bit
stream of Dolby Digital Surround
VIDEO IN: 1 Vp-p (75 ohms)
To be continued
EldGrX/+ 20