Electronic Adjustment Functions; Side Parts; Armrests; Control Unit - B+B Triplex Manual De Instrucciones

TRIPLEX
| Electric Wheelchair
• Remove the screw and adjust the seat to the desired angle.
• Place the screws into the nearest hole and tighten them again.
3.5.4. Electronic adjustment
functions
Depending on the configuration it may also be possible to adjust the
angle of the seat, backrest and footrests electronically. For further
details, see chapter 4, "Using the wheelchair".

3.5.5. Side parts

You can slide the side parts sideways.
• Undo the fastening screw underneath the seat and slide the side
part into the desired position (fig. 10).
• Tighten the screw again.
10
48
Make sure that both pins, on the right and left, are
fully engaged.
Beware of the risk of to the user, carer and third
parties when electronically adjusting the seat
functions.
Make sure the fastening is firmly tightened.
Electric Wheelchair |

3.5.6. Armrests

The armrests can be completely taken off to be able to get in and out
of the chair from the side. In addition, the height of the armrests can
be adjusted. They can also be adjusted sideways by adjusting the side
parts (see side parts).
Removing the armrests
• To remove the armrest, loosen the wing bolt and pull out the
armrest to the top (fig. 11).
• When installing the armrest, make sure it is inserted all the way
and fastened again.
Adjusting the height
• First take the armrest out of the mounting.
• Remove the arresting bolt and screw it back into the armrest at the
desired position (fig. 12).
• The lowest hole represents the maximum height of the armrest.

3.5.7. Control unit

• The control unit can be mounted either on the right or left-hand
side underneath the armrest each.
• The control unit must be adjusted by a qualified mobility dealer to
warrant safe functionality of the wheelchair.
Adjusting the height
• The distance to the armrest can be adjusted.
• Loosen the screw connection on the inner side of the side part.
(fig. 13)
• Move the control unit into the desired position, then tighten the
screw again.
Bischoff & Bischoff GmbH | 01.06.2019
TRIPLEX
11
12
13
49