Description Of Functions Of Vr-2 Control - B+B Triplex Manual De Instrucciones

TRIPLEX
| Electric Wheelchair
Display of mode
The mode display shows the preselected mode. Settings from 1 to 5
LEDs are available. The modes indirectly define the maximum available
speed when the joystick is moved, i.e. in mode 5 the highest maximum
speed is available and in mode 1 the lowest (fig. 21).
21
Setting the mode
Press these buttons to change the mode, i.e. increase (right) or reduce
(left) the maximum available speed. The speed is controlled by
movement of the joystick (fig. 22).
22
Horn
Press this button to sound the horn (fig. 23).
23
Immobiliser
To protect your wheelchair from unauthorised use or theft store it in a
locked room or activate the immobiliser.
• Press and hold the On/Off button until you hear a beep and
release it.
• Move the joystick in the direction of travel and then to the neutral
position. It will beep in each position. Now the control is locked.
• Switch on the controller with the On/Off button.
• Move the joystick in the direction of travel and then to the neutral
position. It will beep in each position. Now the control is released.
52
Electric Wheelchair |
4.2. Description of functions of
VR-2 control
24
25
Bischoff & Bischoff GmbH | 01.06.2019
TRIPLEX
53