CAMPAGNOLA SHAMAL ULTRA Manual Del Usuario página 33

4 - SPROCKET ASSEMBLY AND REMOVAL
4.1 - 9s, 10s, 11s, 12s SPROCKETS of Campagnolo s.r.l. (on FW body for sprockets of Campagnolo s.r.l.)
Refer to the instruction leaflet enclosed with the sprockets for all the assembly, disassembly, use and maintenance operations.
4.2 - 9S, 10S, 11S SPROCKETS FROM SHIMANO INC. and SPROCKETS FROM SRAM CORPORATION
(on the Campagnolo freewheel body for Shimano Inc. 9/10/11s sprockets and sprockets)
®
IMPORTANT!
WITH THE 11S FREEWHEEL BODY, ONLY USE THE ADAPTER (M - FIG.27) FOR 9S AND 10S
M
SPROCKET PACKS BY SHIMANO INC. AND SRAM CO. (THE ADAPTER MUST NOT BE USED
FOR 11S SPROCKET PACKS BY SHIMANO INC.).
The adapter (M - Fig.27) must be fitted on the freewheel body of the 9s or 10s sprocket pack, or on
any washer supplied together with the 9s or 10s sprocket pack.
See the instruction sheet provided by the sprocket pack manufacturer for installation, removal and
maintenance instructions.
27
4.3 - 11S, 12S SRAM CORPORATION SPROCKETS
(on RL Campagnolo body for Sram Corporation RL XD BODY)
This wheel is also compatible with the SRAM XD body (version with 30 mm pawl zone diameter). See the instruction sheet provided by the sprocket pack
manufacturer for installation, removal and maintenance instructions.
14