CAMPAGNOLA SHAMAL ULTRA Manual Del Usuario página 36

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 74
• When riding in wet conditions, remember that the stopping power of your brakes is greatly reduced and the adherence of the tires to the ground is
considerably reduced. This makes it harder to control and stop your bicycle. Extra care is required when riding your bicycle in wet conditions to avoid an
accident. An accident could result in severe personal injury or death.
• Never make any modifications whatsoever to any component of any Campagnolo product.
• Parts which have been bent or otherwise damaged in an accident or as a result of any other impact must not be re-straightened. They must be replaced
immediately with original Campagnolo parts.
• After using the wheel for the first time, check wheel trueness and circularity.
WARNING!
Using wheels that have not been centred properly or which have broken or damaged spokes may result in accidents, personal injury or death.
• Do not expose the carbon wheels to high temperatures. Do not store bike parts in vehicles parked in the sun, and do not store near radiators or other
heat sources. Do not store carbon fiber products in direct sunlight.
IMPORTANT: for cleaning the bicycle only use environmentally-friendly and neutral products without caustic substances and safe to use for you and
for the environment.
NOTE
• Never spray your bicycle with water under pressure. Pressurized water, even from the nozzle of a small garden hose, can pass seals and enter into your
Campagnolo components, damaging them beyond repair. Wash your bicycle and Campagnolo components by wiping them down with water and neutral
soap.
• When cleaning the wheels, only use non-aggressive, non-corrosive products such as water and neutral soap, or specific products specially designed for
cleaning bicycles. Absolutely never use abrasive or metal sponges. Dry with a soft cloth.
WARNING!
Salt water environments (as found on winter roads and near the seaside) can cause galvanic corrosion on most bike parts. Carefully rinse, clean, dry and
re-lubricate all exposed parts to avoid damage, malfunctions and accidents.
6.1 - CLEANING THE WHEELS
17

Publicidad

Tabla de contenido
loading

Tabla de contenido