USER'S MANUAL. PROLITE-60
2 SAFETY RULES
2.1 Generals
*
This is a class I equipment, for safety reasons plug it to a supply line with the
corresponding ground terminal.
*
This equipment can be used in Over-Voltage Category II installations and
Pollution Degree 2 environments.
*
When using some of the following accessories use only the specified ones to
ensure safety.
Mains cord
*
Observe all specified ratings both of supply and measurement.
*
Use this instrument under the specified environmental conditions.
*
The user is not authorised to manipulate inside the instrument:
Any change on the equipment should be carried out by qualified personnel.
*
The negative et shielding for Input / Output connectors are connected to
ground potential.
*
Do not obstruct the ventilation system.
*
Follow the cleaning instructions described in the Maintenance paragraph.
09/2007
Page 5