Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL TV EXPLORER
In the Measurement mode the screen shows the available measurements
according to the type of signal selected.
5.4
Channel Tuning / Frequency Tuning
Pressing
[24] key the
tuning and back again.
In channel tuning mode turning the rotary selector
channels defined in the active channels table. When turning it clockwise frequency
increases while turning it anticlockwise frequency decreases.
In frequency tuning mode there are two ways of tuning:
1. Turning the rotary selector
Turning the rotary selector
continuous from 5 to 1000 MHz and from 950 to 2150 MHz). When turning it
clockwise frequency increases while turning it anticlockwise frequency
decreases.
2. Using the keyboard.
Press the rotary selector
appear on the upper left corner of screen the keyboard symbol of manual data
entry
), next enter the frequency value in MHz using the numeric
keyboard. The TV EXPLORER
frequency closest to the entered value and then display it on-screen.
5.5
Automatic Transmission Search
Holding pressed the
When tuning a channel the instrument tryes to identify it and save it with the
configuration. If the identification is not possible the channel is removed from list. As a
result obtains a new channel plan that only contains the channels that have been
identified.
10/2012
HD
ISDB-T/T
B
switches from frequency tuning to channel
EXPLORER
[1].
[1] selects the desired frequency (tuning is
[1] (the frequency listing will disappear and will
HD
ISDB-T/T
[25] key search starts over the active channel plan.
[1] sequentially tunes the
will calculate the tuneable
B
Page 31
Publicidad
Capítulos
Tabla de contenido
