Section 4
Front Panel of the LEEP System 1000
Electrosurgical Generator
(Cart not shown)
1
1.
Main Switch (On/Off)
2.
Socket for pedal switch
3.
Socket for active electrodes
4.
Socket for neutral electrode
5.
Warning light of neutral electrode alarm (red)
6.
Coagulation light (blue)
7.
Pure cut and blend light (yellow)
Symbols on the LEEP System 1000 Electrosurgical Generator
Classification I Type BF protected against defibrillator effects
Floating output circuit (Applied Part)
Cautions – consult this manual for safety precautions
Pedal connection
Active handle connection
Patient Plate connection
High voltage
45 °C
Temperature limitation
10 °C
12
5
8
2
11
Workstation Controls
LEEP System 1000
6
7
10
9
Figure 6
8.
Mode control:
9.
Power control
10.
Display
Smoke Evacuator Controls
11.
Suction Control Knob
12.
Smoke Evacuator Power Switch (On/Off)
®
Workstation • Model KH1000A • Operating Manual • English
®
(Colored, numbered boxes are also
located later in this manual.)
4
3
12
Pure Cut
Blend Cut
Coag
(continued)