LAVAZZA A Modo Mio DESEA Instrucciones De Uso página 50

EN IT
Place a cup under the supplying spout.
Press the FREE DOSE
supply to end.
Open and close the lever before removing and emptying
the cup.
Empty the cup and supply one more time, by pressing
the FREE DOSE
When a supply is selected, the machine will activate
the electric water pump over 7 seconds.
If water is found inside the hydraulic circuit, the ma-
chine will normally supply.
If no water is found inside the hydraulic circuit, the
machine will stop supplying over 5 seconds and will
try to supply again up to a maximum of 5 time.
After 5 attempts have been made, the machine will
cause the "No water"
a steady yellow light, to inform that water is missing,
and will also emit an acoustic signal.
MACHINE SETTING
button and wait for the
button again.
warning lamp to come on to
ACOUSTIC SIGNAL ACTIVATION /
DEACTIVATION
Set the machine to the stand-by mode.
Simultaneously keep the ESPRESSO
FEE buttons depressed over at least 5 seconds.
The machine will emit a prolonged acoustic signal to notify
the acoustic signal deactivation, and two brief acoustic sig-
nals to notify the activation.
Once the procedure has been completed, the machine
will go back to the stand-by mode.
STAND-BY FUNCTION
To ensure the energy conservation the machine auto-
matically passes to the Stand-by mode after 9 minutes
of not being used.
The machine can be manually set to the stand-by mode,
before a 9 minutes' time, by pressing the On/Stand-by
, button: the machine will emit an acoustic signal.
In the "Stand-by" mode, the buttons will be OFF, and the
On/Stand-by button
light. The machine can be activated again by pressing
the On/Stand-by
50
/LONG COF-
will come on to a less intense
button.