EN
IT
Problem encountered
Milk does not foam.
The milk-based beverage temperature
is too hot.
The milk-based beverage
temperature is too cold.
Noisy operation of the cappuccino
maker during the preparation with
milk.
TROUBLESHOOTING
Possible causes
» Milk unsuitable for use.
» Too hot milk temperature.
» Beater coil not fitted into place.
» Insufficient amount of milk fed with
respect to the selected / desired
amount.
» Excessive amount of milk fed with
respect to the selected / desired
amount.
» Milk shipping beater incorrectly fitted
into place.
76
Solution
» It is recommended that whole milk
(pasteurized or UHT treated) and/
or cold skimmed milk from the fridge
(4-8°C) should be used.
» Use milk at the fridge temperature
(i.e. ranging between 4°C and 8°C).
» Make sure that the beater coil has
been fitted into place correctly.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
» Add more milk by following the
indications of the icons on the milk
jug.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
» Decrease the amount of milk by
following the indications of the icons
on the milk jug.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
» Fit the milk whipping beater into
the correct position, as shown in the
Manual (see page 67).
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.