Disconnecting Cables; Securing Cables - Porsche 9Y0.012.003.A Manual De Instrucciones

Changing Supply Cables and Vehicle Cables
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
Fig. 2: Connections on the control unit
EL
The supply cable A is removed and inserted at the top
CZ
of the control unit.
The vehicle cable B is removed and inserted at the
HU
bottom of the control unit.
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
30

Disconnecting Cables

Fig. 3: Disconnecting cables
b Charging of the high-voltage battery has ended
and the vehicle plug has been removed from the
vehicle charge port.
b The plug has been disconnected from the
electrical socket.
1. Remove screw C using a suitable tool.
2. Lift the lever A.
3. Pull out the plug B until resistance is first felt.
4. Close the lever A.
5. Pull out the plug B fully.

Securing Cables

Fig. 4: Securing cables and plugs
b The lever A is closed.
1. Insert the plug B into the control unit until
resistance is first felt.
2. Lift the lever A.
3. Push in the plug B fully.
4. Close the lever A.
5. Secure the plug B to the control unit using
screw C.