Emptying The Grass Catcher - Black and Decker BEMW472ES Manual De Instrucciones

English
Mowing (Fig. J, K)
nOTE: AlWAYs insPECT AREA WhERE MOWER is TO
BE UsED AnD REMOVE All sTOnEs, sTiCKs, WiRE,
AnD OThER DEBRis WhiCh MighT BE ThROWn BY ThE
ROTATing BlADE.
We recommend to use your mower as outlined in this
section in order to achieve optimum results and to reduce
the risk of cutting the main cable.
1. Loop the extension cord through the cable
management system as shown (Fig. J). Ensure you
7
leave approximately 3 feet (100 cm) of cord between
the safety switch 1 and the cable management system.
2. Ensure that the cable management system can slide
freely from one side to the other.
3. Place the bulk of the extension cord on the lawn, close
to the starting point (position 1 in Fig. K).
4. Switch the mower on as described above.
5. Proceed as shown in Fig. K.
6. Move from position 1 to position 2.
7. Turn right, stepping over the extension cord and
proceed towards position 3. The cable management
system will slide from one side to the other, ensuring
the extension cord is kept away from the cutting blade.
8. Turn left, stepping over the extension cord and move
towards position 4. The extension cord will slide from
one side of the handle to the other, ensuring the
extension cord is kept away from the cutting blade.
9. Repeat the above procedure as required.

WARNING: Do not work towards the cable as shown
in Fig. K.
Fig. .J
7
Fig.K
8
Pivot Control (Fig. L)
This mower is equipped with Pivot Control. This function
allows for close quarters maneuverability and turning.
1. To activate the pivoting action of Pivot Control
press one of the Pivot Control button
comfort grip handles 2 left or right 20 degrees.
2. The handles will automatically lock in normal operating
position when the handles are positioned at zero degrees.

CAUTION: Ensure the Pivot Control handle is locked in
place before using the mower.
Fig. L
5
4

Emptying the grass catcher

1. Release the ON/OFF switches
2. Remove the grass catcher
3. Empty the contents.
Cable storage (Fig. N)
The cable holders 8 provide a safe and convenient way to
store the extension cord when not in use.
1. Wrap the extension cord around the cable holders in a
Figure eight pattern.
Fig.N
8
Carrying the mower (Fig. A)

WARNING: Rotating blade can cause serious injury.
Release both ON/OFF switches
and unplug mower before lifting, transporting, or
storing the mower. Store in a dry place.
• The mower can be carried using the convenient carry
handles 12 .
,
4
5 and move the
5
3 and unplug the mower.
10 .
3 to turn mower off