Modbus Tcp; Application Software - Mettler Toledo IND780 Manual De Instalación

IND780 Installation Manual
ControlNet and EtherNet IP
The IND780 supports ControlNet communications or EtherNet IP interface options
and the appropriate driver software.
DeviceNet
DeviceNet is an RS-485 based network using CAN chip technology. This network
was created for bit- and byte-level devices. The network can be configured to run
up to 500kbits per second depending on cabling and distances. Messages are
limited to 8 unfragmented bytes. The network can include up to 64 nodes
including the master, which is commonly called the scanner.

Modbus TCP

Modbus/TCP is used to establish master-slave/client-server communication
between intelligent devices. It is an open standard network protocol, widely used in
the industrial manufacturing environment. The ModbusTCP protocol takes the
Modbus instruction set and wraps TCP/IP around it. The Modbus TCP protocol is
supported by the Ethernet / IP interface board, version 1.32 or higher.

Application Software

The following application software modules can be added to the IND780 terminal
to provide additional functionality for specific workplaces and industries.
Axle-780
The Axle-780 application supports vehicle weighing on a single-platform axle
scale. It can be operated in automatic (unattended) or manual (attended) modes,
and features the following:
• Weighs vehicles with up to 12
axles
• Configurable to flag overloads
and control ticket printing for
overloaded trucks
Drive-780
Drive-780 provides additional inbound / outbound vehicle weighing and control of
traffic lights or gates associated with a truck scale. It includes the following:
• One-pass weighing using stored
tare weights
• Transient vehicle weighing
• Traffic light and gate control
1-12
• Transaction ID enterable via keyboard
or RFID (badge) reader
• Integrates use of traffic lights to
instruct driver when to move
• Two-pass weighing using temporarily
stored tare weights
• Commodity conversion
• Tare expiration