Descargar Imprimir esta página

Britax MULTI-TECH III Instrucciones De Uso página 31

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50
5e
5f
5g
IMPORTANT
ensure that the belt and
seat in position
If the belt buckle of your seat is not positioned correctly, try a
different seat position.
In case of doubt, contact Customer Service at
Tel.: +49 (0) 8221 3670 -199/-299
service.de@britax.com
Unscrew the SICT anti-clockwise (on the side closer to the vehicle door) until
it has a distance of 5 mm to the vehicle door or has been unscrewed to the
(Fig.
5f).
maximum
Put your child in the child seat and apply the harness. Ensure that the harness
is not twisted. Tighten the harness by pulling the adjustment straps forward.
IMPORTANT
– The lap belt should be positioned as far forward and as low as
possible over the child's pelvis.
Finally, ensure that the chest pads are pulled down on your child's chest
(Fig.
5g).
– Check the position of the belt buckle and
NOT
the buckle is holding the child
(Fig.
5e).
or by e-mail to
or visit
www.britax.com.
9-18 kg

Publicidad

loading