AirSep Focus Manual Del Paciente página 158

Focus™
Storing the Focus unit outside its temperature specifications may
affect performance. (Refer to the Specifications section of this
manual.)
When using Focus in a car, boat, or on other DC sources with the
DC power supply, make sure that the vehicle is started and
running before connecting the Focus unit. If the DC power supply
does not illuminate and requires resetting, disconnect the DC
power supply from the DC socket, restart your vehicle, and then
reconnect your DC power supply to the DC socket. Failure to
follow these instructions can result in the power supply not
supplying power to Focus.
When the car in which you are using the Focus unit is turned off,
disconnect and remove the unit from the car. Do not store Focus
in a very hot car or in other similar, high- or low-temperature
environments. Operating or storing the unit outside the normal
temperature range can affect the performance of the Focus.
(Refer to the Specifications section in this manual.)
If the Focus has been stored for an extended period of time
outside its normal operating temperature range, the unit should
be allowed to return to normal operating temperature before
being turned on. (Refer to the Specifications section in this
manual.)
Storing your Focus battery for extended periods of time at high
temperatures or with a fully charged/completely discharged battery
can degrade its overall battery life.
Depending upon the temperature of the Focus battery, it can take
several minutes for the charging cycle to start after connecting to
power. This is a normal condition and is intended for safe
charging.
®
AirSep Corporation
MN172-1 rev. - 03/11
GB
GB-6