Front View; Preparatory Measures; Power Supply; Battery Replacement - Trotec BB 20 Manual De Instrucciones

Front view

01. Sensor
02 . On/off button
03 . Zero calibration button
04 . Down/right button
05 . Blue button for ESC/NO/BACK functions in the
menu or background lighting ON/OFF in operating
mode
06 . Display: indicates the layer thickness
07 . Unit of measurement
08 . NFe display when measuring non-ferrous metals;
Fe display when measuring ferrous metals;
09 . Indicates the currently set working mode: Auto or
according to the magnetic induction or eddy current
principle
10. Indicates that the appliance is being controlled by
the PC
11. USB interface
12. "Low battery" display
13. Working mode: Direct / group mode
14. Statistical display: AVG, MAX, MIN, SDEV
15. The (statistical) number of measured values
16. Red button for OK/YES/MENU/SELECT
17. Up/left button
(red button)
G
(blue button)
Operating manual – layer thickness measuring instrument BB 20

02 . PrEPArAtOry MEASurES

Power supply

Press the key to check the battery charging
status . The display remains grey: the battery is not
inserted or the charge is so low that the LCD does
not turn on .
Symbol:
The measuring instrument switches off after approx. 1
second . the battery must be replaced . Incorrect measu-
rements can result if the battery voltage is too low .

Battery replacement

1. Remove the screws from the battery compartment lid
with a Philips screwdriver .
2 . Remove the lid from the battery compartment .
3 . Remove the spent battery .
4 . Insert a new battery .
5 . Close the lid and cover and replace the screws .
Ensure that the polarity is correct when inserting
the battery!

03 . MENu SyStEM ANd BASIC SEttINgS

Menu system

Press the on/off button
or off . The measuring instrument is in operating mode .
Press the red button to access the menu and then the
following menu settings .
It is recommended that you familiarise yourself
with the menu settings before using the appliance
for the first time in order to obtain the maximum
benefit and to avoid errors later on .
Press the blue button to return to the previous
menu item . Press the qor the p button in or-
der to select individual menu items .
to switch the appliance on
B - 3