Lubricating Plan; Wheel Change - AL-KO Solo T 22-111.7 HDS-A V2 Comfort Manual De Instrucciones

GB
Activity
Checking the engine oil lev-
)*
el
Changing the engine oil
Cleaning the air filter
Replacing the air filter
Checking the spark plug
Checking the brake (test
braking on a straight path)
Check the tyre pressure
Check the mowing blades
Check for loose parts
Checking V-belts (visual
check)
Cleaning the lawn tractor
Cleaning the air intake grille
)*
on the engine
Clean the transmission to re-
move grass and mowing res-
idues
)* Refer to the operating instructions of the en-
gine manufacturer
NOTE
It may be necessary to shorten the
maintenance intervals compared to
those stated in the table above in case
of severe loading and at high tempera-
tures.

10.2 Lubricating plan

To ensure that moving parts can move freely, we
recommend lubricating the following points at
least once a year.
Use a cloth to clean all points to be lubricated be-
fore greasing or spraying. Do not use water, so
as to avoid possible corrosion.
Lubrication points:
■
Grease the grease nipples on the right and
left steering knuckles (11) using multi-pur-
pose grease.
40
Before
each use
X
)*
)*
)*
)*
X
X
X
X
X
After After the
each use first 5
hours
X
X
■
Spray oil onto the bearings of the front axle
on the frame (10).
■
Grease the toothed segments and steering
pinion on the steering box (12) using multi-
purpose grease.
■
Grease the roller bearing and hub on the
front and rear axles (13) with multi-purpose
grease.
NOTE
The front and rear wheels must be re-
moved for greasing the axles and bear-
ings.
■
Pivoting and bearing points: Lubricate all
movable pivoting and bearing points.

10.3 Wheel change

Wheel changes are only allowed to be carried out
on firm, level ground.
1. Park the lawn tractor and remove the ignition
key.
Every 25 Every 50
operating operating
hours hours
X
X
X
X
X
Maintenance
Each
time be-
fore put-
ting into
storage
X
X