Spray Attachment - Stihl RE 90 Manual De Instrucciones

English
1 Handle
The handle is used when carrying and moving the
pressure washer.
2 Holder
The holder is used to store the spray gun.
3 Holder
The holder is used to store the spray attachment.
4 Carrying handle
The carrying handle is used to carry the pressure
washer.
5 Connector
The connector is used to connect the high-pressure
hose.
6 Rocker switch
The rocker switch is used to switch the pressure washer
on and off.
7 Holder
The holder is used to store the connecting cord.
8 Connecting cord
The connecting cord connects the pressure washer to
the mains plug.
9 Clip
The clip attaches the mains plug to the coiled connecting
cord.
10 Mains plug
The mains plug connects the connecting cord to a
socket.
11 Connector
The connector is used to connect the water hose.
12 Compartments
The compartments are used to store the supplied
nozzles.
13 Holder
The holder is used to store the spraying set.
14 Holder
The holder is used to store the high-pressure hose.
40
15 Cleaning pin
The cleaning pin is used to clean the nozzle.
# Rating plate with serial number
3.2

Spray attachment

1 2
13
14
12
15
1 Latch
The latch holds the nozzle in the spray lance.
2 Spray lance
The spray lance connects the spray gun with the nozzle.
3 Spray gun
The spray gun is used to hold and guide the spray
attachment.
4 Retaining latch
The retaining latch unlocks the trigger.
5 Trigger
The trigger opens and closes the valve in the spray gun.
The trigger starts and stops the water jet.
6 Locking lever
The locking lever holds the connector in the spray gun.
7 High-pressure hose
The high-pressure hose transports the water from the
high-pressure pump to the spray gun.
3 Overview
3 4 5
9 7
6
11
10
8
0458-814-9821-B