– Mowing blades
– Grass catcher box
– Skirting protectors
– V-belt (ME 545 V)
2. Compliance with the information in
this instruction manual
The VIKING machine must be used,
maintained and stored with the care
described in this instruction manual. Any
damage caused by non-compliance with
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
– inadequately dimensioned power
cables (cross section),
– incorrect electrical connection
(voltage),
– product modifications not approved by
VIKING,
– the use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality,
– improper use of the product,
– use of the product for sporting or
competitive events,
– resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
44
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots),
– corrosion and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
15. Environmental protection
Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal (
4.9).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.
16. Standard spare parts
Mowing blade:
6340 702 0100
Blade fastening screw:
6340 760 2800
The blade fastening screw must be
renewed each time the blade is
replaced. Spare parts are available
from a VIKING specialist dealer.
17. Manufacturer's
declaration of CE conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A-6336 Langkampfen/Kufstein
declare under our sole responsibility that
the machine
lawn mower, manually-operated and
mains-powered (ME),
manufacturer's
VIKING
brand
type
ME 545.1
ME 545.0 C
ME 545.0 V
serial number
6340
conforms to the following EC directives:
2000/14/EC, 2006/42/EC, 2011/65/EU,
2014/30/EU
0478 121 9909 H - EN