Standard Equipment; Rotary Handle; Preparing The Machine For Operation; Assembling The Handlebar - Viking MB 248 Manual De Instrucciones

Start the engine.
Stop the engine.

6. Standard equipment

Item Designation
A Basic unit
B Upper part of grass catcher
box
C Lower part of grass catcher
box
D

Rotary handle

E Flat head bolt
F Cable guide
Instruction manual
Engine instruction manual
7. Preparing the machine for
operation
7.1 General
Risk of injury!
Observe the safety instructions in
the section "For your safety" (
● Place the machine on level and firm
ground when performing all the
operations described.
0478 111 9928 B - EN

7.2 Assembling the handlebar

Danger of pinching!
Hold the upper handlebar (1) with
one hand at its highest point when
screwing in the two rotary
handles (D).
● Insert flat head bolt (E) through cable
guide (F).
● Attach cable guide (F) to motorstop
cable (2).
● MB 248 T, MB 253 T:
2
Also attach cable guide (F) to self-
Qty.
propulsion cable (3).
1
● Fit upper handlebar (1) onto the outside
1
of lower handlebar sections (4) as
shown.
1
● Insert flat head bolts (E) – on left with
cable guide (F), on right without –
2
through bores from the inside and
tighten with rotary handles (D).
2
1
1
7.3 Attaching and detaching the
1

recoil starter rope

Attaching:
● Detach the spark plug socket from the

engine.

● Press the motorstop lever (1) to the
handlebar and hold.
● Slowly pull out the recoil starter rope (2)
and attach it to the rope holder (3).
4.).
● Slowly release the recoil starter rope (2)
and motorstop lever (1).
● Connect the spark plug socket.
Detaching:
● Detach the spark plug socket from the
3 engine.
● Press the motorstop lever (1) to the
handlebar and hold.
● Slowly pull out the recoil starter rope (2)
and detach it from the rope guide (3).
● Slowly return the recoil starter rope (2)
and release the motorstop lever (1).
● Connect the spark plug socket.
7.4 Folding down the upper
handlebar
The upper handlebar (1) can be
folded down for space-saving transport
and storage of the mower.
Risk of injury!
Stop the engine before folding
down the upper handlebar and
detach the spark plug socket.
No additional loads must be placed
on the upper handlebar (1) (e.g.
hanging work clothing over the

upper handlebar).

4
Danger of pinching!
The upper handlebar (1) can fold
down on its own when the two
rotary handles (3) are released.
Therefore hold the upper
handlebar (1) at its highest point
before releasing the two rotary
handles (3).
● Detach the recoil starter rope. (
● Release the rotary handle (3) on each
side (by turning anti-clockwise).
● Slowly fold the upper handlebar (1)
forwards.
1
7.3)
37