Metabo HPT C 3607DRA Manual De Instrucciones página 39

NOTE
Do not give a strong shock to the display panel or
break it. It may lead to a trouble.
ABOUT ERROR LAMP OF AC/DC ADAPTER
Status
Before use
Power on
Adapter
Power
suspended
Power
Box
suspended
TRANSPORTATION OF THE MAIN BODY
The vice assembly could be dropped during transportation.
Either remove the assembly or slip a piece of wood
between the vice to fi rmly secure it. (Fig. 58)
Drop the head and insert the locking pin (see page 16
"Releasing the locking pin").
Turn and loosen the side handle, turn the turntable as far
right as it will go, and secure the turntable by turning the
handle to the fi xed position.This will make the main body
even more compact.
When transporting the main body, carry it in your arms,
holding the grip located on the base with both hands or
carry handle.
Indications of the indicator lamp
Power
Lamp
(GREEN)
Blinks
Lights
Blinks
Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Blinks
Lights
Lights for 0.1 seconds. Does not light
for 0.1 seconds. (off for 0.1 seconds)
Blinks
Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Table 7
Error lamp
(RED)
Light off
Light off
Locking pin
Vise assembly
Base grip
English
Indicates
Plugged into power
source
Tool can be used
Adapter cannot be used
due to high temperature.
(Can be used once the
adapter is cooled)
Overload
Cannot be used because
the temperature in the box
is too high
(Can be used once the
box is cooled)
Motor head
Carry handle
Turntable
Piece of wood
Fig. 58
Handle
Side
handle
39