SAFETY
SAFETY
INSTRUCTIONS
INSTRUCTIONS
Proper maintenance
Do not operate
and inspection
a damaged lift.
is necessary
for safe operation.
c
SAFETY
CAUTION
INSTRUCTIONS
Read operating
Authorized personnel
and safety manuals
only in lift area.
before using lift.
©
WARNING
CAUTION
Position vehicle
Use vehicle
with center of gravity
manufacturer's
midway between
lift points.
adapters.
©
Do not override
self-closing
lift controls.
©
WARNING
WARNING
Position vehicle
Remain clear of lift
with center of gravity
when raising or
midway between
lowering vehicle.
adapters.
©
WARNING
WARNING
Avoid excessive
Clear area if vehicle
is in danger of falling.
rocking of vehicle
while on lift.
c
SAFETY INSTRUCTIONS
• Daily inspect your lift. Never operate if it malfunctions or if it has
CAUTION
? ?
?
• Thoroughly train all employees in use and care of lift, using
Lift to be used
by trained operator
• Never allow unauthorized or untrained persons to position vehicle
only.
©
©
• Prohibit unauthorized persons from being in shop area while lift is in
• Do Not permit anyone on lift or inside vehicle when it is either being
• Always keep area around lift free of tools, debris, grease and oil.
• Never overload lift. Capacity of lift is shown on nameplate affixed to
©
• Do Not stand in front of the vehicle while it is being positioned in lift
• Do Not hit or run over lift arms or adapters. This could damage lift
©
• Load vehicle on lift carefully. Position lift adapters to contact at
CAUTION
• Do Not block open or override self-closing lift controls; they are
• Do Not remove or disable arm restraints.
CAUTION
• Remain clear of lift when raising or lowering vehicle.
• Always use safety stands when removing or installing heavy
Always use
• Avoid excessive rocking of vehicle while on lift.
safety stands when
removing or installing
heavy components.
©
©
• Clear area if vehicle is in danger of falling.
CAUTION
• Remove tool trays, stands, etc. before lowering lift.
• Release locking latches before attempting to lower lift.
• Position lift arms and adapters to provide an unobstructed exit
Auxiliary adapters
may reduce
load capacity.
©
©
broken or damaged parts. Use only qualified lift service personnel
and genuine Rotary parts to make repairs.
manufacturer's instructions and "Lifting It Right" and "Safety Tips"
supplied with the lift.
or operate lift.
use.
raised or lowered.
the lift.
bay.
or vehicle. Before driving vehicle into lift bay, position arms and
adapters to provide unobstructed entrance onto lift.
the vehicle manufacturer's recommended lift points. Raise lift until
adapters contact vehicle. Check adapters for secure contact with
vehicle. Raise lift to desired working height.
DO NOT go under vehicle if locking latches are not
engaged.
designed to return to the "Off" or Neutral position when released.
components.
before removing vehicle from lift area.
2