Interrupting Buffering Mode; Resuming Buffering - Fronius Acctiva Smart 25 A Manual De Instrucciones

Ocultar thumbs Ver también para Acctiva Smart 25 A:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 169
If the battery voltage selection window does not open, then the battery is in a state of ex-
treme deep-discharge (less than 2 V). In this case, buffering is not permitted. We recom-
mend that the battery is replaced.
Danger following ignition of oxyhydrogen caused by sparks resulting from the
charging leads being disconnected too soon.
This can result in serious injury and damage to property.
► Before disconnecting the charging leads, press the Stop/Start button to finish buffering.
7
Interrupting Buff-
ering mode
Danger from disconnecting or unplugging the charging leads during buffering.
This can result in damage to connection sockets and connecting plugs.
► Do not disconnect or unplug charging leads while buffering.
Resuming buffer-
ing
68
5
WARNING!
6
-
Disconnect the charger
Disconnect the black charging lead from the negative pole (-) of the battery
-
Disconnect the red charging lead from the positive pole (+) on the battery
-
NOTE!
1
-
2
-
Confirm the selection using the Stop/Start key
To cancel Buffering mode:
Press the Stop/Start key
Press the Stop/Start key during buffering
The charging process is interrupted
Press the Stop/Start key
Buffering is resumed

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Acctiva professional 35 a

Tabla de contenido