Domo DO7293S Manual De Instrucciones página 38

USE WITH REMOTE CONTROL
Important: when adjusting settings with the remote control, you must aim it at the machine.
Do not use the remote control near the charging station as it may interfere with the signal and affect its
operation.
If you will not be using the remote control for a long period of time,
remove the batteries.
1. HOME: return to the charging station for re-charging
2. ON/OFF: on-off button
3. MODE: select cleaning programme
4. MAX: maximum suction power
5. Arrows
1. ON/OFF: on-off button
· Press on the on-off button for automatic cleaning. The vacuum
cleaner will plot its own path to vacuum the entire area, taking walls, obstacles and stairs into account.
2. HOME: return to the charging station for re-charging
· If you wish to charge the vacuum cleaner during use, press the HOME button. The vacuum cleaner will
now automatically look for the charging station.
· PLEASE NOTE: it is possible that the vacuum cleaner cannot find the charging station because there
are too many obstacles around the charging station. Make sure that the free area around the charging
station is as large as possible.
· If the battery is empty, the vacuum cleaner will automatically return to the charging station.
3. MODE: select cleaning programme
While vacuuming, you can select from 4 different cleaning programs. First, use the ON/OFF button to
start the vacuum cleaner in automatic cleaning mode. Press the MODE button.
Make sure the remote control is aimed at the machine. If the mode has been changed, you will hear a
short signal.
The mode selected can be read on the display:
· MODE 1: spiral
The vacuum cleaner will move in a spiral formation.
· MODE 2: automatic
The vacuum cleaner will plot its own path to vacuum the entire area, taking walls, obstacles and
stairs into account.
38
DO7293S
Charging Socket
Remote Control
1. ON/OFF
2. Direction buttons
3. Max: robot change to powerful cleaning mode.
(Only works when robot in standby status)
4. Auto charging
5. Cleaning Mode
Note:
A. Install two AAA type batteries into the remote control before use.
B. Remove the batteries if the remote will be left unused for a long period.
C. If you use the remote near the charging station, the robot may not recognize the command
and may not work.
Docking Middle Cover
Charging Poles
2
4
8
1
1
5
2
4
3
3
5