Čistenie A Údržba; Product Maintenance - Domo DO7293S Manual De Instrucciones

Product Maintenance

Product Maintenance
Cleaning Side Brushes
Maintenance
duct Maintenance
Nabíjanie mimo dobíjaciu stanicu
Cleaning Side Brushes
Clean the side brush when it become dirty and replace it if it's damaged. The maximum life span of
Zapojte adaptér a pripojte konektor do zásuvky vo vysávači
de Brushes
ning Side Brushes the side brush is 12 months.
Clean the side brush when it become dirty and replace it if it's damaged. The maximum life span of
· Symboly pri nabíjaní:
Maintenance
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
the side brush is 12 months.
· blikajúce "1111" = prístroj sa nabíja
brush when it become dirty and replace it if it's damaged. The maximum life span of
the side brush when it become dirty and replace it if it's damaged. The maximum life span of
with the L/R mark on the bottom base of the robot.
Note: Before replacing side brushes, check and ensure that the L/R mark on the side brush match
· svieti symbol "FULL" = prístroj je plne nabitý
s 12 months.
de brush is 12 months.
de Brushes
with the L/R mark on the bottom base of the robot.
· symbol "Erro" = pre nabíjanie musí byť vysávač
Cleaning Dust Bin and Filters
placing side brushes, check and ensure that the L/R mark on the side brush match
Before replacing side brushes, check and ensure that the L/R mark on the side brush match
zapnutý. Zapnite hlavný vypínač.
Cleaning Dust Bin and Filters
brush when it become dirty and replace it if it's damaged. The maximum life span of
ark on the bottom base of the robot.
he L/R mark on the bottom base of the robot.
Empty and clean the dust bin after each usage following the steps as show in the figures below:
s 12 months.
Empty and clean the dust bin after each usage following the steps as show in the figures below:
ust Bin and Filters
ning Dust Bin and Filters
placing side brushes, check and ensure that the L/R mark on the side brush match
ČISTENIE A ÚDRŽBA
rk on the bottom base of the robot.
n the dust bin after each usage following the steps as show in the figures below:
y and clean the dust bin after each usage following the steps as show in the figures below:
ČISTENIE NÁDOBY NEČISTÔT A FILTRA
ust Bin and Filters
Nádobku nečistôt a filter odporúčame čistiť po každom použití, a to nasledujúcim spôsobom:
n the dust bin after each usage following the steps as show in the figures below:
1
A. Hold the bottom of dust bin, and press down on the button using your
A. Hold the bottom of dust bin, and press down on the button using your
thumb to take out of the dust bin.
thumb to take out of the dust bin.
om of dust bin, and press down on the button using your
ld the bottom of dust bin, and press down on the button using your
out of the dust bin.
b to take out of the dust bin.
om of dust bin, and press down on the button using your
3
out of the dust bin.
C. After press down button
C. After press down button
and o
pen dust bin upper cover
and o
pen dust bin upper cover
5
D. Open dust bin cover and take out the
down button
fter press down button
primary filter and HEPA filter.
D. Open dust bin cover and take out the
in upper cover
pen dust bin upper cover
down button
primary filter and HEPA filter.
in upper cover
F. Wash the dust bin and primary filter under tap water,
F. Wash the dust bin and primary filter under tap water,
1. Stlačte tlačidlo otvorenia (uvoľnenie) nádoby nečistôt a vyberte ju z vysávača.
clean the HEPA filter with brush, avoid washing it under
clean the HEPA filter with brush, avoid washing it under
2. Otvorte a vyberte filter HEPA (vrátane držiaku).
water.
water.
3. Z nádobky vysypte všetky nečistoty - najlepšie je vysypávať rovno nad smetiaku alebo košom.
4. Následne nádobu a držiak filtra opláchnite pod tečúcou vodou. Nechajte ich uschnúť a potom vložte
t bin and primary filter under tap water, späť na svoje miesto. Medzitým vyčistite filter HEPA (vyklepte alebo vyčistite pomocou kefy na
sh the dust bin and primary filter under tap water,
prach)
bin and primary filter under tap water,
filter with brush, avoid washing it under
the HEPA filter with brush, avoid washing it under
5. Ak je HEPA filter značne znečistený, môžete ho po cca 30 dňoch používania tiež vyčistiť a premyť
ilter with brush, avoid washing it under
.
pod tečúcou vodou. Pred vložením späť do vysávača musí byť absolútne suchý.
· Akonáhle je HEPA filter veľa znečistený alebo viditeľne poškodený, tak ho musíte vymeniť za
nový. Maximálna životnosť filtra je približne 6 mesiacov.
· Vymeňte filter HEPA a držiak v nádobe. K tomu najprv otočte kryt na stranu.
6. Pri výmene filtra s držiakom musíte najskôr otvoriť veko nádoby (pootočenie na stranu).
www.domo-elektro.be
D. Open dust bin cover and take out the
D. Open dust bin cover and take out the
primary filter and HEPA filter.
primary filter and HEPA filter.
D. Open dust bin cover and take out the
primary filter and HEPA filter.
G. Assemble primary filter and HEPA filter again into
G. Assemble primary filter and HEPA filter again into
G. Assemble primary filter and HEPA filter again into
dust bin.
dust bin.
dust bin.
16
16
16
Product Maintenance
in Fig a.
B. Press the "HOME" button on the remote control or robot to
Cleaning Side Brushes
charging docking automatically as shown in Fig b.
Clean the side brush when it become dirty and replace it if it's dam
the side brush is 12 months.
Note: Before replacing side brushes, check and ensure that the L
with the L/R mark on the bottom base of the robot.
Cleaning Dust Bin and Filters
Empty and clean the dust bin after each usage following the steps
Note:
a. When robot is in charging, the LED panel will gradually show
b. When charging is over, the LED panel will show "FULL".
c. In standby status, the robot will
A. Hold the bottom of dust bin, and press down on the button using you
thumb to take out of the dust bin.
d. In working status, the robot will look for the charging dock au
level is low.
2
B. Take out dust bin.
In Order to Extend Battery's Life
a. Please charge the robot for up to 5 hours during the first cha
b. Charge the robot as soon as possible when battery capacity
c. The robot will return to the charging dock automatically whe
B. Take out dust bin.
B. Take out dust bin.
capacity is low.
d. When you do not use the robot for some time, please ful
switch off the robot and keep it in a cool but dry place.
B. Take out dust bin.
4
C. After press down button
e. If the robot has been put aside over 3 months, please ch
and o
pen dust bin upper cover
before using it for cleaning.
E. Empty the dust bin.
6
E. Empty the dust bin.
E. Empty the dust bin.
F. Wash the dust bin and primary filter under tap water,
E. Empty the dust bin. clean the HEPA filter with brush, avoid washing it under
water.
G. Assemble primary filter and HEPA filter again into
G. Assemble primary filter and HEPA filter again into
dust bin.
dust bin.
16 16
Fig a
B. Take out dust bin.
D. Open dust bin cover and take out th
primary filter and HEPA filter.
E. Empty the dust bin.
when the batte
show
10
G. Assemble prim
dust bin.
16
79
DO7293S