Diagnostic Software; Installing Diagnostic Software - Stihl ADG 1 Manual De Instrucciones

English

Diagnostic software

STIHL diagnostic software can be used
only with the MDG 1, ADG 1 and ADG 2
analyzers.
System Requirements
Install STIHL diagnostic software only
on a computer that meets the system
requirements. You must have
administrator rights to install the
software on a computer running
® ®
Microsoft Windows , contact your
system administrator if necessary.
Operating System
® ®
Microsoft Windows XP SP 3 or
–
®
Microsoft Windows Vista
–
® ®
Microsoft Windows 7
–
Software Requirements
®
Microsoft .NET 3.5 or higher
–
® ®
Adobe Acrobat Reader 9 or
–
higher
Hardware Requirements
Minimum requirements
CPU 1 GHz
–
256 MB free memory
–
minimum of 100 MB hard disk
–
space
Resolution – SVGA monitor
–
(minimum resolution 1024 x 768)
USB interface 1.1 or higher
–
CD-ROM or DVD drive
–
8
Recommended configuration
CPU 2 GHz
–
512 MB free memory
–
minimum of 100 MB hard disk
–
space
Resolution – SVGA monitor
–
(minimum resolution 1024 x 768)
USB interface 1.1 or higher
–
CD-ROM or DVD drive
–
®
or
Installing Diagnostic
Software
Sequence
It is essential to observe the sequence of
the steps described. Only then will the
STIHL diagnostic software be properly
installed on the computer and the
analyzer connected to the computer.
1 Check system requirements – see
"Diagnostic Software".
2 Place CD-ROM in the compueter's
CD-ROM or DVD drive and start the
setup program – see "Installation of
STIHL Diagnostic Software".
3 Connect analyzer to power supply –
see "Connecting Analyzer to Power
Supply".
4 Plug in and connect the USB cable
– see "Connecting Analyzer to
Computer".
5 Start STIHL diagnostic software –
see "Connecting Analyzer to
Computer".
Installation of STIHL Diagnostic
Software
Place the CD-ROM in the computer's
CD-ROM or DVD drive.
Automatic start
The automatic start functions only if the
computer supports automatic starting of
a program from a CD-ROM
(AUTORUN). If the setup program on
the computer does not start
automatically, start it manually.
ADG 1