Light Emitting Diodes (Led) On Battery - Stihl ADG 1 Manual De Instrucciones

English
If the battery is in order
Battery OK
Battery is serviceable and can be used.
Depress push button (4) on unit for
N
about 1 second.
Remaining capacity
The capacity of a new battery is 100%. It
loses capacity as it ages. This may
reduce the running time of the cordless
power tool.
If the battery is faulty
Battery fault Code: xxx
Check warranty period
Replace the battery – check
N
warranty period
or
Battery fault Code: xxx
No warranty
Replace the battery – no warranty
N
The battery is subject to normal wear
and tear even during regular operation in
accordance with instructions and,
depending on the type and duration of
use, has to be replaced in good time.
The three-digit code (shown as xxx in
the description) indicates the cause of
the fault in the battery. In case of claims,
always quote the code on the warranty
request form.
6
After test
Take the battery out of the unit.
80 %
Light Emitting Diodes (LED)
on Battery
Four light emitting diodes indicate the
condition of the battery.
1
Press button (1) to activate the
N
display – the display goes off
automatically after 5 seconds.
The light emitting diodes can glow or
flash green or red.
Light emitting diode glows con-
tinuously green.
Light emitting diode flashes
green.
Light emitting diode glows con-
tinuously red.
Light emitting diode flashes red.
ADG 1