Connecting Analyzer To Computer - Stihl ADG 1 Manual De Instrucciones

Manual start
Open "My Computer" and select
computer's CD-ROM or DVD-ROM
drive. Launch installation with double-
click on "SDSSetup.exe".
Installation via Internet
The diagnostic software is also available
from
https://download.stihl.com/sds/sdssetup
.exe
Login data
User name: _stihl_sds_user
Password: STIHL_diagnose_download!
ADG 1
Connecting Analyzer to
Computer
Connect the analyzer to the computer
only after installing the STIHL diagnostic
software.
A USB cable is used to connect the
battery analyzer to the computer. The
USB cable is included with the analyzer.
Connect analyzer to the computer
N
with the USB cable.
Hardware assistant appears.
Check – "No, not this time" – click
N
"Next".
Check – "Install software from a list
N
or other source" – click "Next".
Check – "Also search following
N
source" – click "Search".
The following directory must be selected
for drivers: Installation
Directory\STIHL\SDS\ Driver\ ADG1\
Select installation directory, e.g.
N
® ®
Microsoft Windows XP Standard
Installation Directory:
C:\Programs\STIHL\SDS\Driver\AD
1\) – click "OK"
ADG 1 driver is installed. Exit
N
assistant with "Finish".
Start STIHL diagnostic software.
N
The status bar shows
ADG 1 connected
Clicking on "ADG 1" graphic
N
changes view on screen to
"Initializing".
Now follow the operating
N
instructons for the STIHL diagnostic
software – observe safety
precautions in STIHL diagnostic
software during operation.
English
9