Switching The Blower On/Off; Switching On; Switching Off; Checking The Blower - Stihl BGA 100 Manual De Instrucciones

9 Switching the Blower On/Off

9 Switching the Blower On/Off
9.1

Switching On

► Hold the blower with one hand on the control handle -
wrap your thumb around the handle.
1
► Push the retaining latch (1) with your thumb to position
► Pull the trigger (2) with your index finger and hold it there.
The blower accelerates and air flows from the nozzle.
The air flow rate is controlled by the trigger (2).
9.2

Switching Off

► Release the trigger.
No air flows from the nozzle.
► If air continues to flow from nozzle: Remove the battery
and contact your STIHL dealer for assistance.
Blower has a malfunction.
► Push the retaining latch into position

10 Checking the Blower

10.1 Checking the Controls

Trigger
► Pull the connecting cable plug out of the socket.
0458-711-9621-A
2
.
► Push the retaining latch into position
► Try to pull the trigger.
► If the trigger can be pulled: Do not use the blower and
contact your STIHL servicing dealer for assistance.
The retaining latch is faulty.
► Push the retaining latch into position
► Pull the trigger and then let it go.
► If the trigger is stiff or does not spring back to its idle
position: Do not use the blower and contact your STIHL
servicing dealer for assistance.
The trigger has a malfunction.
Switching on the blower
► Insert the connecting cable plug.
► Push the retaining latch into position
► Pull the trigger and hold it there.
Air flows from the nozzle.
► If 3 LEDs on the battery flash red: Pull connecting cable
.
plug out of the socket and contact your STIHL dealer for
assistance.
There is a malfunction in the blower.
► Release the trigger.
No air flows from the nozzle.
► If air continues to flow from nozzle: Pull connecting cable
plug out of the socket and contact your STIHL dealer for
assistance.
Blower has a malfunction.
English
.
.
.
35