Safety Instruction For Installation; Build-In - Amica AWDM6I X-TYPE Manual De Instrucciones

SAFETY INSTRUCTION FOR
INSTALLATION
• Before connecting the appliance to the mains electricity supply
make sure that the connection data on the data plate (voltage and
frequency) correspond with the mains electricity supply, otherwise
the appliance could be damaged. Consult a qualified electrician if in
any doubt.
• The socket and on-off switch should be easily accessible after the
appliance has been built in.
• The warming drawer may only be built in combination with those
appliances quoted by the manufacturer as being suitable. The man-
ufacturer cannot guarantee trouble-free operation if the appliance is
operated in combination with appliances other than those quoted by
the manufacturer as being suitable
• When building in the warming drawer in combination with another
suitable appliance, the food warming drawer must be fitted above a
fixed interim shelf in the housing unit. Please ensure that the hous-
ing unit can support both its weight and that of the other appliance.
• As the combination appliance is placed directly on top of the warm-
ing drawer once it is built in, an interim shelf is not necessary be-
tween the two appliances.
• The appliance must be built in so that the contents of the drawer
can be seen. This is to avoid scalding from hot food spilling over.
There must be enough space for the drawer to be pulled out fully.
• The warming drawer is available in two models, which differ in
opening the door. The building-in dimensions for the warming draw-
er must be added to the building-in dimensions for the combination
appliance to establish the niche size required
• When building in the combination appliance, it is essential to follow
the instructions given in the operating and installation instructions
supplied with the combination appliance.
• All dimensions in this instruction booklet are given in mm.

BUILD-IN

1. Ventilation cut-out required when combined with a pyrolytic oven
2. Building-in dimension including mains supply cable connection Con-
nection cable L = 1000 mm
* Appliances with glass front
** Appliances with metal front
NOTE:
• The maximum power of compact appliances is 3350W
• The power cord can only be routed through the hole in the bottom
of the cabinet to avoid touching the back shell of the oven.
• Drawings of product and furniture You will find on the back on this
user manual
- 30 -