Unpacking / Assembly; Starting The Machine - McCulloch MFT44 100 Manual De Instrucciones

Note: In the constant desire to improve
the products, the manufacturer states
that the whole of this manual is not
contractual and reserves the right
to modify the specifications of his
machines without notice.
Unpacking
1.1
WARNING:
Take care not to cut the cables
or scratch the machine's
paintwork when cutting the
edges of the case.
Ref. Contents of the case
A Engine Parts
B Stand Pipe
Wheel Assy
C
D Horizon Bar
E Upper Cover
F Locking Knob
G Tidy Cover
Hardware Bag
H
Filling with engine oil
and checking the level
2.1
Topping up the petrol
2.2
Recommend to USE
Octane Value over 90
Set the choke
in position A
2.3

UNPACKING / ASSEMBLY

1.2
WARNING:
Inappropriate assembly of this
rotary tiller could cause severe
injuries. Ensure that you follow
all the instructions carefully.
1
Fitting the wheel assy.
2
Fitting the stand pipe.
3
Fitting the handle bar.
4
Fitting the horizon bar.
5
Fitting the upper cover.
6
Fitting the tidy cover.

STARTING THE MACHINE

Press ignition switch to
ON
2.4
Pull the recoil start
handle
2.5
WARNING:
When the machine starts,
remain within the safety zone.
Assembling
Note: Any dismantling operation must
only be performed by a husqvarna
workshop.
1.3
1 - Engine
2 - Clutch control
3 - Handle
4 - On/Off switch
5 - Wheel
6 - Upper cover
7 - Tidy cover
8 - Tine
9 - Belt Cover
10 - Stand pipe
1.4
A - Nominal power
B - Weight
C - Serial number
D - Year of manufacture
E - Type of machine
F - Manufacturer's name and address
G - Identification
H - Product number
2.6
WARNING:
After assembling the machine
completely, tighten all the bolts
and screws with moderation:
do not overtighten.
Description
of the components
Type plate
Set the choke
in position B
EN
BG
HR
CZ
DA
NL
ET
FI
FR
DE
GR
HU
IT
LV
LT
NO
PL
PT
RO
RU
SK
SL
ES
SE
TR
UK
9