Citizen CT-S851 Manual De Usuario página 47

Virtual DIP switch setting mode
While paper is loaded, press and hold button 2 while turning the power on.
Enter virtual DIP switch setting mode.
• Press button 1( ) to select a memory switch number. (Switches cycle in the
following order: MSW1 → MSW2 → ... → MSW6 → MSW1)
• Press button 2 ( ) to move from switch 1 towards switch 8. (The selection loops from
8 back to 1.)
• Press button 3 ( ) to change between ON and OFF .
• Press button 4 (
Save settings menu
• Press button 1 (YES) to save the settings and return to the "Online" display.
• Press button 2 (NO) to not save the settings and return to the "Online" display.
• Press button 3 (BACK) to return to the previous mode.
FEED
) to go to the save settings menu.
FEED
— 43 —