Install the washer, lock washer, and hex nut onto the post.
Securely tighten but do not overtighten.
Align the holes in the hood with the holes in the firebox.
Insert the hood bolt (DD) through the hole in the hood
and into the hole in the firebox.
Slide the flat washer (CC) and lock washer (BB) onto the
hood bolt.
Securely tighten the hood nuts (AA).
STEP 7: INSTALLING HEAT TENTS
See Figure 11.
Heat tents work to evenly distribute heat inside the grill. Do
not grill without the heat tents installed.
Fully raise the hood.
Carefully place the heat tents over the gas burners.
HOOD
Fig. 11
ASSEMBLY
STEP 8: INSTALLING GRATES AND GRATE
INSERTS
See Figures 12 - 13.
Fully raise the hood.
Carefully lay grates inside the grill assembly.
Set a round grate insert in the hole of each of the grates.
HEAT TENTS
Fig. 12
GAS
BURNER
13 - English
GRATES
GRATE
INSERTS