edenox DPN-28 Manual De Instrucciones página 10

Switch off the device using the control on the panel (Figure 1, 'C'), and then disconnect the
power cable of the plate heating distributor.
WARNING!!!
Before the distributor is first put into operation, it is necessary to remove the protective film
and the protective substance from the surfaces of the device by wiping it with soapy water,
concentrating on the moving platform.
2.4 LAYOUT AND DESCRIPTION OF THE MANUFACTURER'S RATING
LABEL.
The label of the device should contain the following information:
1. Manufacturer's logo.
2. Country of origin.
3. Year of production.
4. Serial number.
5. Model.
6. Operating voltage.
7. Current frequency.
8. Rated power.
9. CE marking.
10. Disposal symbol.
4
edenox.com
ENGLISH