edenox DPN-28 Manual De Instrucciones página 14

4.2 CLEANING AND GENERAL MAINTENANCE.
All outer steel surfaces and all surfaces of the moving platform need to be cleaned daily using a
small amount of detergent and lukewarm water. After being cleaned, the surfaces should be rinsed
with cold water and dried.
Do not clean acid-resistant steel surfaces with scrapers or wire cleansers, since they can
scratch the surfaces.
If the device is not going to be used for a long time, cover its surfaces, particularly the
operating surfaces, with a thin coat of Vaseline or a preservative that may come into contact with
food.
IMPORTANT!!!
Do not clean the electrical plate heating distributor with a water jet, since this might damage
the electrical and electronic components ensuring the proper operation of the device.
Before starting a cleaning or maintenance
procedure, disconnect the device from the
mains. After cleaning, leave the device open to
dry.
4.3 DISPOSAL OF THE DEVICE.
When its lifetime comes to an end, the device must be carried to an electronic and electronic
waste disposal facility.
This is indicated by a symbol on the product, in the instruction manual, and on the on the packaging.
In order to prepare the electrical plate heating distributor to be disposed of, it is necessary to
sort the elements of the device according to the materials they are made of.
Depending on the material these element are made of (see the symbols on the components),
they can be recycled. Having electric waste and electronic equipment recycled means an active
contribution to the protection of the environment.
Contact local authorities to obtain more information on the nearest electrical waste collection
facility.
To protect the environment, deliver waste equipment to a suitable facility in compliance with
applicable regulations.
8
edenox.com
When the device is being serviced, the power
cable and the plug should be in sight and on
hand so that the person working can easily
access them.
ENGLISH