Installation - edenox DPN-28 Manual De Instrucciones

The following is strictly forbidden:
 cleaning and repairing when the distributor is connected to the power supply and switched on;
 leaving the device unsupervised when it is operating;
 keeping up the maximum power and temperature of the device when it is empty;
 using the device when it is not earthed;
 operating without protective clothing;
 carrying or transporting the device without a pallet or a suitable platform.
follow the instructions contained in this manual, hence it is recommended that you carefully read all
information herein.
Keep the manual for later use.
WARNING!!!
Do not use the device if it is faulty.
1.3 TECHNICAL PARAMETERS
EXTERNAL DIMENSIONS
MODEL
(mm)
diameter length
DPN-28 391
DPN-34 451
DPC-28 417
DPC-34 477
DCN-55 - 602

2. INSTALLATION

2.1 General information.
2.2 Transport, lifting, unpacking, storage.
2.3 Intended use and limitations.
2.4 Layout and description of the manufacturer's rating label.
2.5 Installation and assembly.
2.6 Connections (electricity, gas, and water).
2
edenox.com
The manufacturer shall not be held liable for any damage attributable to the failure to
CAPACITY
plates/
width high
baskets
- - 730 40-45
- - 730 40-45
- - 730 40-45
- - 730 40-45
642 712
*CUTOUT
DIMENSIONS
(mm)
diameter length
375 -
435 -
407 -
466 -
5-6 - 600
ENGLISH
VOLTAGE POWER
(V/Hz) (W)
width
- -
- -
- 230/50 480
- 230/50 480
575 -
WEIGHT
(kg)
-
-
- 18