Display
Adjusting the spectrum analyser
The spectrum analyser on your display
shows the output level of the car sound sys-
tem. If the spectrum analyser is switched
on, it is automatically displayed if you do
not press a key for a while during the play-
back of an audio source.
You can also deactivate the spectrum ana-
lyser.
Switching the spectrum analyser on/off
u
Press the MENU button 9.
u
Press the softkey 5 with the display
label "DISPLAY".
u
Press the softkey 5 with the display
label "SPECTRUM" repeatedly until the
desired setting "SPECTRUM OFF" or
"SPECTRUM ON" appears in the top
line of the display.
Press the OK joystick 8 or the MENU
u
button 9 to exit the menu.
The settings are saved.
Inverting display contents
You can invert the display representation.
Press the MENU button 9.
u
u
Press the softkey 5 with the display
label "DISPLAY".
u
Press the softkey 5 with the display
label "INVERT".
u
Press the OK joystick 8 or the MENU
button 9 to exit the menu.
The settings are saved.
Radio mode
This device is equipped with an RDS radio
receiver. Many of the receivable FM stations
broadcast a signal that not only carries the
programme but also additional information
such as the station name and programme
type (PTY).
The station name appears on the display
as soon as the tuner receives it. The pro-
gramme type can be displayed upon re-
quest. For further information, please
read the section entitled "Programme type
(PTY)".
Adjusting the tuner
To ensure proper functioning of the tuner,
the device must be set for the region in
which you are located. You can select be-
tween Europe and America (USA). The tun-
er is factory-set to the region in which it was
sold. If you experience problems with your
radio reception, please check this setting.
u
Press the MENU button 9.
u
Press the softkey 5 with the display
label "TUNER".
u
Press the softkey 5 with the display
label for the desired region, "AREA
EUR" or "AREA USA".
u
Press the OK joystick 8 or the MENU
button 9 to exit the menu.
The settings are saved.
Radio mode
15