u
Press the softkey 5 with the display
label "BAND".
u
Press the softkey 5 with the display
label "FM" for the FM waveband.
u
Press the softkey 5 with the display
label "MW" for the MW waveband.
u
Press the softkey 5 with the display
label "LW" for the LW waveband.
u
Press the softkey 5 with the display
label "SW" for the SW waveband.
The basic radio menu of the selected wave-
band is displayed.
Selecting the FM memory bank
To switch between the FM memory banks
FM1, FM2, FM3 and FMT,
u
press the NEXT button 4 repeatedly
until the display shows the desired
memory bank.
The memory banks are called in sequence
from FM1 to FM2, FM3 and FMT.
Note:
If your device is set to the region USA
and you selected the AM waveband,
you can use the NEXT button 4 to se-
lect from the AM memory banks AM1,
AM2 and AMT.
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
u
Move the joystick 8 up or down.
The radio tunes into the next receivable sta-
tion.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the RDS function is deactivated.
u
Move the joystick 8 to the left or the
right.
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting net-
work".
Note:
The convenient RDS function must be
activated before you can use this fea-
ture. When using this feature, you will
only be able to switch to stations that
you have received once before already.
u
Move the joystick 8 to the left or the
right.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
u
press the TUNER button = in radio
mode.
The display shows the radio function
menu.
u
Press the NEXT button 4.
Radio mode
19