TIM – Traffi c Information Memory
Switching TIM on/off
If the car sound system is switched on, you
can switch the TIM functions on or off.
u
In radio mode, hold the TUNER button
= pressed for longer than two sec-
onds.
The TIMPLAY menu is displayed.
If traffi c announcements were recorded,
the last message is played. The most cur-
rent message has the number "TIM1". The
station name/frequency appears in the top
line of the display and the time of the re-
cording in the bottom line.
"TIM" and the number of the message ap-
pear next to the top two softkeys on both
sides of the display.
If no messages are recorded, "NO TIM"
briefl y appears on the display.
Switching TIM off
If you want to switch TIM off,
u
In radio mode, hold the TUNER button
= pressed for longer than two sec-
onds.
The TIMPLAY menu is displayed.
u
Press the NEXT button 4.
The TIMSET menu again.
u
Press the softkey 5 with the display
label "TIM ON" repeatedly until "TIM
RECORD OFF" appears on the display.
u
press the TUNER button = or the OK
joystick 8.
The settings are saved.
24
Note:
If you do not switch on the device for
more than 72 hours, the TIM function
is automatically switched off.
Switching TIM on
If you want to switch TIM on again,
u
in radio mode, hold the TUNER button
= pressed for longer than two sec-
onds.
The TIMPLAY menu is displayed.
u
Press the NEXT button 4.
The TIMSET menu again.
u
Press the softkey 5 with the display
label "TIM ON" repeatedly until "TIM
RECORD ON" appears on the display.
u
Press the TUNER button = or the OK
joystick 8.
The settings are saved.
Note:
After switching off the device with the
vehicle ignition or the button 1, the
current status "TIM ON" or "TIM OFF"
briefl y appears on the display.
Playing stored traffi c
announcements
To play the stored traffi c announcements,
u
in radio mode, hold the TUNER button
= pressed for longer than two sec-
onds.
The TIMPLAY menu is displayed.
If traffi c announcements were recorded,
the last message is played. The most cur-
rent message has the number "TIM1". The