Crossover; Tmc For Dynamic Navigation Systems - Blaupunkt Bremen MP76 Instrucciones De Manejo E Instalación

Subwoofer and centre speaker

Crossover

In crossover mode, the high frequencies are
played via the front channels and the low
frequencies via the rear channels.
u Press the AUDIO button :.
"AUDIO MENU" appears on the display.
u Press the NEXT button 4.
"AUDIO MENU 2" appears at the bottom of
the display.
u Press the softkey 5 with the display
label "CROSSOVR".
Crossover is now adjusted.
To be able to use the crossover mode, you
must set the high-pass fi lter and the low-
pass fi lter.
u Press the softkey 5 with the display
label "HIPASS" for setting the high-pass
fi lter.
u Press the joystick 8 left or right to
adjust the frequency for the high-pass
fi lter.
u Press the softkey 5 with the display
label "LOWPASS" for setting the low-
pass fi lter.
u Press the joystick 8 left or right to
adjust the frequency for the high-pass
fi lter.
The settings are automatically saved.
48
TMC for dynamic navigation
systems
TMC stands for "Traffi c Message Chan-
nel". Traffi c reports are broadcast digitally
via TMC, which means they can be used
by compatible navigation systems during
route planning. Your car sound system has a
TMC output, which you can use for connect-
ing Blaupunkt navigation systems. You can
fi nd out from your Blaupunkt dealer which
navigation systems can be used with your
car sound system.
TMC