Benning MM 11 Instrucciones De Servicio página 18

Digital multimeter for
- Direct voltage measurements
- Alternating voltage measurements
- Direct current measurement
- Alternating current measurement
- Resistance measurements
- Diode test
- Continuity testing
- Capacity measurement
- Frequency measurement
- Pulse duty ratio measurement
- Temperature measurement
Table of contents
. User notes
2. Safety note
3. Scope of delivery
4. Unit description
5. General information
6. Environment conditions
7. Electrical specifications
8. Making measurements with the BENNING MM 
9. Maintenance
0. Application of rubber protection frame
. Technical data of the measuring accessories
2. Environmental notice
. User notes
These operating instructions are intended for
- skilled electricians and
- trained electronics personnel.
The BENNING MM 11 is intended for making measurements in dry environ-
ment. It must not be used in power circuits with a nominal voltage higher than
1000 V DC and 750 V AC (More details in Section 6. "Environmental condi-
tions") The following symbols are used in these operating instructions and on
the BENNING MM 11:
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!

The symbol indicates that the information provided in the operating
instructions must be complied with in order to avoid risks.
This symbol on the BENNING MM 11 means that the

BENNING MM 11 is totally insulated (protection class II).
This symbol on the BENNING MM 11 indicates the built in fuses.
This symbol appears in the display to indicate a discharged battery.
This symbol designates the „diode test" range.
This symbol designates the „continuity test" range.
The buzzer is used for the acoustic result output.
This symbol designates the „capacity test" range.
(DC) Direct voltage or current.

(AC) Alternating voltage or current.
Ground (Voltage against ground).
09/ 2007
Operating instructions
BENNING MM 
­ B ENNING­MM­11­

6