Assembly And Preparation; For Use; Accessories Contained In The Packing; Assembly Procedure - Butler ERGOLOCK.CB Manual De Instrucciones

7102-M004-0_B
GB
Page 31 of 116
ERGOLOCK.CB - AD - ST
9.0

ASSEMBLY AND PREPARATION

FOR USE

After having freed the various components from the
packing check that they are complete, and that there
are no anomalies, then comply with the following in-
structions for the assembly of the components mak-
ing use of the attached series of illustrations.
9.1

Accessories contained in the packing

The packing case contains also the accessory box.
Check that all the parts listed are there.
Code
0326001
Level protection
0322000 Bead lifting lever
1205900 Rimsled, mobile insert
9.2

Assembly procedure

Assemble the machine with the help of Fig. 7, after
checking that in the packing there are the following
parts:
Code
2176000
M10 nut protection plug
2175000
M6 nut protection plug
236007
Fe 10,5x21x2 washer
237043
10x30x2,5 flat washer
206019
TCEI M6x16 screw
222007
M6 high nut
222011 M10 high nut
203058 TE M10x25 screw
1357000
5x28x130 spring
206188
TCEI M6x12 screw
237011
ø6x18 flat washer
1811000
TE M10x35 screw
236004 6,4 flat washer
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Description
Description
Fig. 7
N.
1
1
2
1. Remove the packing from the extension (E) taking
N.
care of the mirror (C) contained in the wrapping.
2
2. (Only for versions CB and AD)
Raise the bead-breaker (B) from the pallet using a
2
system that is able to support its weight, which is
1
about 60 kg., and position it vertically near the in-
1 stallation area.
4
3
2
3
3. Before moving the column (D) position the mount-
1
ing arm (Fig. 8) as indicated in the figure and lock
it. This is achieved using the locking knob. Now
4
remove the column from the pallet and put it on
4
the floor near the machine.
4. Lift the machine body and position it on the floor.
1
3
Fig. 8
Push
Locking
knob
DO NOT LAY THE BEAD -
BREAKER HORIZONTALLY AS
THIS COULD CAUSE THE OIL
RESERVOIR TO EMPTY.