Chuck Height Adjustment (Version With Mobile Selfcentering); Reverse Wheel Pan Protection - Butler ERGOLOCK.CB Manual De Instrucciones

7102-M004-0_B
GB
Page 39 of 116
ERGOLOCK.CB - AD - ST
Fig. 33
7. For wheels with alloy rims, use a proper plastic guard
(Fig. 34 pos. 1).
Fig. 34
To release the wheel, carry out the previously
operations on the contrary way.
INSTRUCTION, USE AND
MAINTENANCE MANUAL
12.3.1 Chuck height adjustment (version
The chuck with central locking has 3 different height
mode. A "quick release" system allows to remove the
chuck mobile part and dowel the support plate at the
required height.
The adjustment through the sliding shaft is possible
following three phases as indicated on the enclosed
photo:
1- Lift the flange as the arrows indicated (Fig. 35 pos.
1).
2 - In the same time release and lift the wheel support
as the arrows indicated (Fig. 35 pos. 2).
3 - Check that the flange return into the coupler position.
Now it's possible to place the tyre in the right way with
the working tools.

12.3.2 Reverse wheel pan protection

In case of use of reverse wheels, to protect the rim, apply
on the rubber platform a protection made to a
transparent plastic material available on demand (Fig.
36 pos. 1). We suggest you a constant replacement of it
and in any case if there are visible damages (see Fig.
36).
with mobile selfcentering)
2
1
Fig. 35
2
1
Fig. 36
1