Tabla de contenido
Publicidad
Herring Bone Stretch
Machine setting
Pattern:
#21
Stitch length:
S.S.
Stitch width:
2–6.5
Foot:
A: Zigzag foot
Thread tension:
2–6
Use as a hemming stitch for blankets, tablecloths and
draperies.
Place the fabric right side up, and sew so that the
rightmost needle position is 3/8" (1.0 cm) from the edge.
Then trim close to stitching. Be careful not to cut the
stitches.
Overcast Stretch Stitching
Machine setting
Pattern:
#28
Stitch length:
S.S.
Stitch width:
3–6.5
Foot:
A: Zigzag foot
Thread tension:
2–6
This stitch is for sewing a seam with an overcast finish.
It is used when making swim wear, ski pants and other
garments which require stretch.
To sew:
Place raw edges of fabric to the "left" of the needle as
shown. Sew in a manner so that the needle pierces the
fabric very close to the outside edge. Or place the fabric
to allow a 5/8" (1.6 cm) seam, then trim the seam
allowance. Raw or worn edges of older garments can be
overcast to prevent further raveling.
40
Publicidad
Tabla de contenido
