Section 4. Care Of Your Machine; Cleaning The Bobbin Holder - Janome Sew Precise Manual De Instrucciones

z
q
x
w
c
r
v
b
n
,
e
t
m
u
y
58

SECTION 4. CARE OF YOUR MACHINE

NOTES:
Unplug the machine.
Do not dismantle the machine other than as explained
in this section.
Do not store the machine in a high-humidity area, near
a heat radiator, or in direct sunlight.
Clean the outside of the machine with a soft cloth and
mild soap.

Cleaning the Bobbin Holder

To insure that the machine operates at its best, you
need to keep the bobbin area clean at all times.
Turn off the power switch and unplug the machine.
z Remove the presser foot and needle. Remove screw
on the needle plate with the screwdriver.
Remove the needle plate and take out the bobbin.
q Screw
x Lift up the bobbin holder and remove it.
w Bobbin holder
c Brush out dust and lint. Wipe the bobbin holder with
a soft, dry cloth.
v Clean the feed dogs and hook race with the lint
brush.
e Lint brush
r Feed dogs
b Wipe the hook race with a soft, dry cloth.
t Hook race
n Insert the bobbin holder into the hook race.
m Make sure the knob of the bobbin holder fits next to
the stopper on the race.
y Knob
u Stopper
, Replace the bobbin.
Attach the needle plate, inserting the two guide pins
into the holes in the needle plate. Tighten the screw
firmly with the screwdriver.