Publicidad
Idiomas disponibles
Idiomas disponibles
Humidity
Control (on some models)
The Humidity Control feature turns on a heater to help reduce
moisture on the door hinge seal. Use in humid environments or
when you notice moisture on the door hinge seal. The
refrigerator
uses more energy when Humidity Control is on.
•
Press Humidity Control when the environment is warm and
more humid, or if you notice moisture on the door hinge seal.
The indicator
light will be lit when humidity control is ON.
•
Press Humidity Control again to turn OFF and save energy
when the environment is less humid.
Press If Moisture
Appears
Temp Alarm (on some models)
The Temp Alarm feature provides temperature
information
in
the event of a power outage.
Power outage. During a power outage, if the temperatures
in the
refrigerator
and freezer compartments
exceed normal
operating
temperatures,
the highest temperature
reached will
be displayed.
•
Press the Temp Alarm touch pad until the indicator light is lit,
to turn on this feature. Press and hold Temp Alarm for
3 seconds until the indicator
light goes off, to turn off this
feature.
Temperature alarm. An alarm will sound repeatedly
if the
freezer or refrigerator
compartment
temperatures
exceed
normal operating
temperatures
for an hour or more.
The temperature
displays will alternately
show the current
temperatures
and the highest temperatures
the compartments
reached.
Press the Temp Alarm touch pad once to stop the audible
alarm and alternating
temperature
displays. The Temp
Alarm light will continue to flash until the refrigerator
returns
to the set temperature.
®
©
Filter Reset (on some models)
The Filter Reset control allows you to restart the water filter
status tracking feature each time you replace your water filter.
See "Water
Filtration System."
•
Press and hold the Filter Reset touch pad for 3 seconds, until
the Replace light turns off.
Order
Replace
Press & Hold
User Preferences
The control center allows you to set user preferences, if desired.
Temperature
Display (FC)
This preference
allows you to change the temperature
display.
F - Temperature
in degrees Fahrenheit
C - Temperature
in degrees Celsius
Alarm (AL)
This preference
allows you to turn off the sound of all alarms.
ON - You will hear the alarm sound.
OFF - You will not hear the alarm sound.
To Access the User Preferences Menu=
1. Press and hold the Door Ajar touch pad for 3 seconds. The
preference
name will appear in the Freezer display and the
preference
status (F or C) or (ON or OFF) will appear in the
Refrigerator
display.
2. Use the Freezer Up Arrow or Down Arrow touch pads to
scroll through the preference
names. When the desired
preference
name is displayed,
press the Refrigerator
Up
Arrow or Down Arrow touch pads to change the preference
status.
3. Set your preferences
by pressing and holding the Door Ajar
touch pad for 3 seconds.
IMPORTANT:
After connecting the refrigerator
to a water source or
replacing
the water filter, flush the water system. Use a
sturdy container to depress and hold the dispenser lever for
5 seconds, then release it for 5 seconds. Repeat until water
begins to flow. Once water begins to flow, continue
depressing and releasing the dispenser lever (5 seconds on,
5 seconds off) until a total of 4 gal. (15 L) has been
dispensed. This will flush air from the filter and water
dispensing system, and prepare the water filter for use.
Additional
flushing may be required in some households. As
air is cleared from the system, water may spurt out of the
dispenser.
•
Allow 24 hours for the refrigerator
to cool down and chill
water. Dispense enough water every week to maintain a
fresh supply.
14
Publicidad
