Publicidad
Idiomas disponibles
Idiomas disponibles
Explosion Hazard
Keep flammable
materials
and vapors, such as
gasoline,
away from refrigerator.
Failure to do so can result in death, explosion, or fire.
IMPORTANT= This refrigerator
is designed for indoor, household
use only.
To ensure proper ventilation
for your refrigerator,
allow for a 1/2"
(1.25 cm) of space on each side and at the top. Allow for a 1"
(2.54 cm) space behind the refrigerator.
If your refrigerator
has
an ice maker, allow extra space at the back for the water line
connections. When installing your refrigerator
next to a fixed
wall, leave a 33/4" (9.5 cm) minimum space between the
refrigerator
and wall to allow the door to swing open.
NOTE= This refrigerator
is intended for use in a location where
the temperature
ranges from a minimum of 55°F (13°C) to a
maximum of 110°F (43°C). The preferred
room temperature
range for optimum performance,
which reduces electricity
usage and provides superior cooling, is between 60°F (15°C)
and 90°F (32°C). It is recommended
that you do not install the
refrigerator
near a heat source, such as an oven or radiator.
1/2" (1.25
cm)
J
]1
I
/
33/4"(9.5 cm)
/
\
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator
into its final location, it is
important
to make sure you have the proper electrical
connection.
Recommended
Grounding Method
A 115 volt, 60 Hz, AC only 15- or 20-amp fused, grounded
electrical
supply is required. It is recommended
that a separate
circuit serving only your refrigerator
and approved
accessories
be provided. Use an outlet that cannot be turned off by a
switch. Do not use an extension cord.
NOTE= Before performing
any type of installation,
cleaning, or
removing a light bulb, turn Cooling OFF, and then disconnect
the refrigerator
from the electrical
source. When you have
finished, reconnect the refrigerator
to the electrical
source and
turn Cooling ON. See "Using the Control(s)."
Gather the required
tools and parts before
starting
installation.
Read and follow the instructions
provided
with any tools listed
here.
TOOLS NEEDED:
•
Flat-blade
screwdriver
•
1/4" Nut driver
•
7,66"and 1/2" Open-end
or two
•
1/4" Drill bit
adjustable
wrenches
•
Cordless drill
IMPORTANT:
•
All installations
must meet local plumbing code
requirements.
•
Do not use a piercing-type
or 3,66"(4.76 ram) saddle valve
which reduces water flow and clogs more easily.
•
Use copper tubing and check for leaks. Install copper tubing
only in areas where the household temperatures
will remain
above freezing.
•
For models with water filters, the disposable water filter
should be replaced at least every 6 months.
6
Publicidad
