Straight Stitch With Auto Tie-Off Function; Inserting Zippers And Piping - Singer 7258 Manual De Instrucciones

QD
STRAIGHT STITCH WITH AUTO ,,_':
;ti
TIE-OFF FUNCTION 89
1. Press the foot control and the machine will sew 4 stitches
in forward and then 4 stitches in reverse and continue to
sew in forward until the foot control is released.
2. Push the reverse switch and the machine will sew 4
stitches in reverse and then 4 stitches in forward and stop.
¢-,
III
III
III
I
I
I
I
III
III
G
INSERTING ZIPPERS AND PIPING
Use zipper foot to sew to the right or left of the zipper or close
to the cording.
INSERTING ZIPPERS
To sew down the right side, attach left side of zipper foot to
presser foot holder so that the needle passes through the
opening on the left side of the foot.
To sew down the left side, attach right side of foot to foot
holder.
PIPING
To pipe soft furnishings, cover cord with a bias strip of fabric
and pin or tack it to the main piece of fabric.
Attach left side of zipper foot to foot holder so that needle
passes through the opening on the left side of the foot.
Helpful Hint: Slight adjusting of the needle position to
sew closer to the piping may be accomplished with
the Stitch Width Control.
Needle of foot to left
Aiguille agauchedu piedpresseur
,ht I
Needleto r
Aiguillea droite du pied presseur
Agujaa la izquierdadel
prensatelas
Agujaa la derechadel
prensatelas
44